Online Safety Community

An integrated approach is needed for Complaints Handling, Adverse Event Reporting, and Recalls

Adverse Event Reporting, and Recalls4

The fact that medical device manufacturers work and operate in various regulatory systems whose requirements are different and not always consistent with each other is recognized and empathized by the new ISO version, the ISO 13485:2016. Because of the divergence in the requirements of each regulatory system; manufacturers are required to identify their roles, as well as the regulatory requirements for that role, and then incorporate them into their Quality Management System.

When it comes to post-market device issues; the various jurisdictions, however, deal with these in different ways. Three interlocking, interrelated processes need to go into the QMS:

  • Complaint management
  • Adverse event reporting
  • Recalls

Supporting QMS processes such as corrective action and design changes also need to complement these three processes. Over and above the QMS processes come the regulatory requirements, which usually involve areas such as recordkeeping and reporting.

A complete learning on how to implement an integrated QMS

Adverse Event Reporting, and Recalls3

A highly educative and valuable learning session on these primary and secondary QMS processes and the way they need to be understood and implemented vis-à-vis the US, EU, and Canadian regulations is being organized by GlobalCompliancePanel, a leading provider of professional trainings for all the areas of reg...

The Director of this two-day seminar is Dan O’Leary, who is President of Ombu Enterprises, LLC, a company offering training and execution in Operational Excellence, which focuses on analytic skills and a systems approach to operations management. Dan brings more than 30 years’ experience in quality, operations, and program management in regulated industries including aviation, defense, medical devices, and clinical labs.

To understand the way in which to implement an integrated QMS in which the various aspects of complaints, adverse reporting and recalls are built; please register for this seminar by visiting An integrated approach is needed for Complaints Handling, Adverse E... This seminar has been pre-approved by RAPS as eligible for up to 12 credits towards a participant’s RAC recertification upon full completion.

Alignment with the FDA’s QMS is a major point

Complaints, Adverse Event Reporting, and Recalls - An Integrated Approach

One of the highlights of the final version of the ISO 13485:2016 standard, which has now become available, is the extent of its alignment with the FDA’s Quality Management System (QMS) requirement. Although the degree of alignment set out in 2016 version of 13485 is significantly higher than that of the previous version of 2003; there still do exist a few points at which it deviates from the FDA’s QMS. Companies that are required to comply with this standard have to keep this in mind.

Now that the ISO 13485:2016, the Medical Device Single Audit Program (MDSAP), and the new EU Medical Device Regulation have been introduced; companies need to update their QMS and integrate all of the elements if their implementation has to be effective and compliant. At this two-day session, Dan will provide the tools that the participants will need for this.

_MG_1317

The agenda of this learning session will be the following:

  • The Regulatory Structure
  • FDA QSR
  • ISO 13485:2016 and regional variants
  • ISO 14971:2007 and regional variants
  • Implementing MDSAP
  • The EU Medical Device Regulation
  • Servicing
  • Identification of problems
  • Servicing data analysis
  • Input to the complaint process
  • Complaints

Identifying complaints

  • Evaluating complaints
  • Investigating complaints
  • Complaint data analysis
  • Input to the corrective action process
  • Input to the risk management process
  • Corrective Action
  • Developing the process
  • Analyzing product and process information
  • Determining subsequent actions
  • Input to the design process
  • Input to the risk management process
  • Design and Design Changes
  • Determining the need for a design change
  • Documenting design changes
  • Design change verification and validation
  • Input to the risk management process
  • Input to the pre-market submission process
  • Risk Management
  • ISO 14971:2007 and regional variants
  • Incorporating post-market information
  • Updating Pre-market Submissions
  • US – The 510(k) guidance
  • EU – Technical files and design dossiers
  • Canada – License changes
  • Adverse Event Reporting
  • US – MDR
  • EU – Vigilance Reports
  • Canada – Mandatory Problem Reporting
  • Recalls
  • US – Corrections and Removals
  • EU – Field Safety Corrective Actions
  • Canada – Recall.

Views: 60

Comment

You need to be a member of Online Safety Community to add comments!

Join Online Safety Community

Take our poll!

Take our poll!

Forum

How to Recover Deleted Microsoft Access Database File

I would recommend you Access Recovery Software to fix the entire issues in access…Continue

Tags: recovery, recover, access, repair

Started by roy hawley 5 minutes ago.

Recovering Microsoft Access Databases (*.mdb, *.accdb)

If you are still unable to repair or recover errors in ms access database file then you can easily repairs corrupt or damage MS Access both (.MDB or .ACCDB) database file with this …Continue

Tags: recovery, repair, data, access

Started by roy hawley 7 minutes ago.

How to fix problems with Outlook .pst

For recovering your Outlook PST file you need to use Scanpst.exe which is free utility by Microsoft but some time its become useless so in this situation you need to approach to any third party tool…Continue

Started by herman martin on Monday.

How to repair Outlook Data File (.pst)

If your pst files get corrupted and you want to repair it then i personally recommend you to use this …Continue

Started by herman martin on Monday.

How can I convert Exchange EDB files to Outlook PST files using EdbMails application? 1 Reply

If you want your Exchange server error free then you have to use the EDB to PST converter software. But it can be done by the choose of powerful EDB to PST converter software. If you fail to choose…Continue

Started by clara dsouza. Last reply by herman martin Nov 7.

Badge

Loading…

© 2019   Created by Safety Community.   Powered by

Badges  |  Report an Issue  |  Terms of Service