Online Safety Community

How to build a complete Safety, Health & Environment Management System through Standards & Practices 2017

 

Course "How to build a complete Safety, Health & Environment Management System through Standards & Practices" has been pre-approved by RAPS as eligible for up to 12 credits towards a participant's RAC recertification upon full completion.

Overview:

A management system, by definition, is a process by which a function or functions are carried out in an organization by a series of hierarchal documents that are prescriptive, and set a particular path on which the organization manages its day-to-day operations.

A management system can be for one function, but more often than not, it incorporates many functions. Functions like accounting, engineering, banking, etc. have their own management systems, and the Safety, Health and Environmental, as well as Training and Security should have their own management system. This brings efficiency, consistency, cost effectiveness and timeliness to the entire process.

In order to work effectively, Corporate sets and creates (with business asset) input, the various standards around the functions

The SH&E, plus training and security are the functions we will build the standards and practices around. There are 16 functions that cover the SHE & TS world. We build a standard and practice around all 16 functions. Supporting documents, associated programs, procedures or standard operating procedures (SOP) will be a part of the particular function being managed. The 16 functions that will have a standard and practice specific to the function are:

  • Hazard identification & control
  • Occupational health & industrial hygiene
  • Incident management
  • Emergency preparedness
  • Environmental
  • Regulatory compliance
  • Reporting performance
  • Managing risk
  • Managing safety
  • Management security
  • Verification & audits
  • Document & record management
  • Contractor & service provider management
  • Competency management (training)
  • Commitment, communication and implementation
  • Managing change

Why should you attend :

Every organization in today's business atmosphere, in order to be competitive and in compliance must have a comprehensive management system in place and operating smoothly. For those companies who do not understand this, the going is much harder and very much more expensive.

The standards and practices that are put in place act as the cornerstone for decisions being made relative to resources and dollars spent within the SH&E scope of business.

This process accomplishes the following:

  • Identifies the things that need to be managed within the function
  • Construct a process, tool, or mechanism that best manages each of those things identified
  • They are usually a set of standards, practices and programs that are built specifically for a particular function
  • Build the standard, practice or program so that it can be adjusted according to results
  • Build a measuring metric, benchmark or scorecard with both lagging and leading indicators
  • Build the management system in a way that is hierarchal in structure within the organization - (corporate sets and standards and the business unit builds the practice around the standard)

 

Areas Covered in the Session:

  • How to build a SH&E management system
  • How to evaluate its effectiveness
  • The tools you need in order to build a SH&E MS
  • How to implement the system with total management support
  • How to develop successful implementation plans, both with management and the workforce
  • How to tell the difference between a standard and a practice
  • How to understand how to design SH&E documents correctly
  • How to assess the risk of not having a MS process in place
  • How to roll the process out
  • How to communicate the process to those who can support the effort

 

 

Who will benefit:

  • EHS Managers, Directors, VP
  • Regulatory Managers
  • Compliance Managers
  • Production Managers, Directors, VP
  • Legal Managers
  • Quality Auditors
  • Operational Leaders (managers, directors, VP)

 

Agenda:

Lecture 1:

Process overview, Main elements of the SH&E MS, Process, infrastructure & system

Internal sources and External sources

What the regulatory agencies are looking for in a SH&E MS

Lecture 2:

System deficiencies

People, process & tools

Lecture 3:

The law perspective & risk analysis

Managing the risks through a systems approach

Lecture 4:

Non-conformance with expectations

Trending for results

Plan-Do-Check-Act

 

Day 2 Schedule

Lecture 1:

Process mapping tools

Creating the Standards & Practices (lots of examples)

Lecture 2:

Continue creating standards & practices

Lecture 3:

SH&E MS plan execution

Communicating the management system

Lecture 4:

SH&E documentation expectations

The MS review & approval process by management

Auditing the MS

How to roll it out - by stages

 

 

Speaker:

James Thatcher,

President, Global Safety Solutions, LLC,

 

James Thatcher the owner and President of Global Safety Solutions, LLC, headquartered in Divide, Colorado. Dr. Thatcher has 35 years of experience in the Oil and Gas, Metals/Minerals and Chemical industry, with management positions in engineering, operations, human resources, safety, health and environment, as well as training and security.

He has a MS in mechanical engineering, and a Ph.D. in psychology/organizational development. He has had many articles published in the Occupational Hazards Magazine, the VPP Leadership Magazine, IADC driller magazine, and through several organizations such as the National Safety Management Society and the World Safety Organization. He has presented at many seminars, summits, conferences, and association meetings for many years.

He is listed as an expert witness for operational as well as safety, health, environmental, training and security issues in the Oil and Gas industry and the mining, minerals and chemical industry. He is recognized in the Safety, Health, Environmental, Training and Security disciplines as an expert in these fields. He was the president of the National Safety Management Society for two terms, and is on their board of directors. He is closely associated with the World Safety Association, and is listed in the United Nations directory as an expert in the field of safety, health, training and security. He was the President of Technical Safety and Training Solutions, Incorporated, and consulted in the United States, Europe and South America.

I offer presentations for EHS conferences and summits, as well as for business group meetings in the area of EHS culture, values, systems, motivation, and inspiration. These messages are both timely and effective in helping to raise the bar in your EHS efforts.

 

 

 

Location: Baltimore, MD Date: April 6th & 7th, 2017 and Time: 9:00 AM to 6:00 PM

 

 

Venue: The DoubleTree Baltimore-BWI Airport

Address: The DoubleTree Baltimore-BWI Airport   890 Elkridge Landing Road - Linthicum, MD 21090

 

Price:

 

Register now and save $200. (Early Bird)

 

Price: $1,295.00 (Seminar Fee for One Delegate)

 

Until February 28, Early Bird Price: $1,295.00 From March 01 to April 04, Regular Price: $1,495.00

 

Register for 5 attendees   Price: $3,885.00 $6,475.00 You Save: $2,590.00 (40%)*

 

 

Quick Contact:

NetZealous DBA as GlobalCompliancePanel

161 Mission Falls Lane, Suite 216, Fremont,CA 94539, USA

Phone: 1-800-447-9407

Fax: 302-288-6884

Email: support@globalcompliancepanel.com      

Website: http://www.globalcompliancepanel.com

Registration Link - http://www.globalcompliancepanel.com/control/globalseminars/~produc...

 

Follow us on LinkedIn: https://www.linkedin.com/company/globalcompliancepanel?

Like us our Facebook page: https://www.facebook.com/TrainingsAtGlobalCompliancePanel/

Follow us on Twitter: https://twitter.com/GCPanel

 

 

 

 

 

 

Views: 85

Comment

You need to be a member of Online Safety Community to add comments!

Join Online Safety Community

Take our poll!

Take our poll!

Latest Activity

Alex posted a blog post

4 eco-friendly safety essentials to help save the world

The health and safety sector and the green sector now thankfully meet with a selection of products that are effective in preventing harm to workers, while also benefitting the environment. Such developments are important factors in the modern workplace, which wants to keep employees safe and now also wants to reduce its carbon…See More
yesterday
Adam Fleaming posted a blog post

The art of writing effective audit observations

Audits are a means of evaluating operations and other functions of an organization. ISO 19011:2011 Guidelines for Auditing Management Systems describes audits as a process used for gathering the evidence of verifiable documents and map their suitability, alignment and fulfilment with the company’s policies and procedures.An audit is an important tool that helps organizations to analyze opportunities, implement best practices, and assess all the important factors in a business, such as risks,…See More
Thursday
John Robinson posted blog posts
Thursday
Profile IconScott Dollar and Nicole J Gomez joined Online Safety Community
Wednesday

Forum

What's your favorite motivational/safety quote? 98 Replies

Favorite Motivational Quote: If you want something, you'll find a way - If not, you'll find an excuse.Favorite Safety Quote: Don't learn safety by accident!Continue

Started by Michelle Sears. Last reply by David R Snell on Wednesday.

Feedback on a injury prevention product we're building.

Hi everyone!For full transparency ill tell you a little about myself and what I hope to accomplish. My name is Zuber and I'm an engineering student who founded a startup helping to build wearable…Continue

Tags: product, prevention, injury, back, safety

Started by Zuber Ahmed on Monday.

Best overall personal safety book? 1 Reply

What do you think is  the best all-in-one book out there for optimizing personal safety and the safety of one's family?  Right now I have …Continue

Started by David R Snell. Last reply by David R Snell Apr 21.

Fire codes for residential buildings

Hi,Can anybody kindly give me a hint how to find Fire Codes for residential buildings in different cities in the United States?Continue

Started by Darren Asad Apr 14.

OSHA and Machine Guard Door Safety???

We have what we feel is not a unique situation and were wondering if anyone might of run across this challenge and know more about the requirements.  We are building a small machine system that…Continue

Tags: electric, osha, air, door, interlocked

Started by Scott V Mar 24.

Badge

Loading…

© 2017   Created by Safety Community.   Powered by

Badges  |  Report an Issue  |  Terms of Service