Online Safety Community

Applied Statistics for FDA Process Validation 2017

The pharmaceutical industry considers Applied Statistics for FDA Process Validation to be of very high importance. In 2011, the FDA set out this guidance for the industry. as part of this guidance, called “Process Validation: General Principles and Practices”, which sets the framework for Process Validation in the pharmaceutical industry, any organization in the pharmaceutical industry has to set up a three-stage process.

These are the three stages:

       I.           Process Design

     II.           Process Qualification, and

  III.           Continued Process Verification. 

Stage 1, or what is called the Process Design stage, is the stage in which the commercial manufacturing process is defined. This definition is based on knowledge gained through development and scale-up activities.

Stage 2, called the Process Qualification, is the stage in which an evaluation is made of the process design to determine if the process is capable of reproducible commercial manufacturing.

Stage 3, the Continued Process Verification, is meant for giving ongoing assurance during routine production to ensure that the process remains in a state of control.

A seminar on the ways implementing Applied Statistics for FDA Process Validation

GlobalCompliancePanel, a leading provider of professional trainings for the regulatory compliance areas, will be organizing a two-day seminar in which the ways of using Applied Statistics for FDA Process Validation will be taught. Richard Burdick, Emeritus Professor of Statistics, Arizona State University (ASU) and former Quality Engineering Director for Amgen, Inc., will be the Director of this seminar on applied statistics for FDA Process Validation.

In order to learn Applied Statistics for FDA Process Validation in-depth, please register by visiting http://www.globalcompliancepanel.com/control/globalseminars/~produc.... This course has been pre-approved by RAPS as eligible for up to 12 credits towards a participant's RAC recertification upon full completion.

A detailed and methodical approach to implementing statistical methodologies

This two-day course on Applied Statistics for FDA Process Validation will focus on the ways by which a systematic approach to implementing statistical methodologies into a process validation program consistent with the FDA guidance can be established.

Beginning with a primer on statistics, Dr. Burdick will explain how the methods of Applied Statistics for FDA Process Validation seminar can be applied in each remaining chapter.

Dr. Burdick will next move on to explaining the two fundamental requirements for Process Validation, namely the application of statistics for setting specifications and assessing measurement systems (assays).

He well then show how to apply statistics through the three stages of process validation as defined by requirements in the process validation regulatory guidance documents.

Given that the methods taught through all these three stages are recommended by regulatory guidance documents; this seminar on Applied Statistics for FDA Process Validation will provide references to the specific citations in the guidance documents.

This seminar on Applied Statistics for FDA Process Validation will lead participants into ways of establishing a systematic approach to implementing statistical methodologies into a process development and validation program that is consistent with the FDA guidance.

All-round learning related to Applied Statistics for FDA Process Validation

Dr. Burdick will teach participants how to:

o  Apply statistics for setting specifications

o  Assess measurement systems (assays)

o  Use Design of Experiments (DOE)

o  Develop a control plan as part of a risk management strategy, and

o  Ensure process control/capability.

All concepts at this Applied Statistics for FDA Process Validation seminar are taught within the three-stage product cycle framework defined by requirements in the process validation regulatory guidance documents.

Although established for the pharmaceutical industry, this seminar on Applied Statistics for FDA Process Validation also provides a useful framework for other related industries.

In this important learning on Applied Statistics for FDA Process Validation; Dr. Burdick will cover the following areas:

o  Apply statistics to set specifications and validate measurement systems (assays)

o  Develop appropriate sample plans based on confidence and power

o  Implement suitable statistical methods into a process validation program for each of the three stages

o  Stage 1, Process Design: utilize risk management tools to identify and prioritize potential critical process parameters; and define critical process parameters and operating spaces for the commercial manufacturing process using design of experiments (DOE)

o  Stage 2, Process Qualification: assess scale effects while incorporating large (pilot and/or commercial) scale data; develop process performance qualification (PPQ) acceptance criteria by characterizing intra and inter-batch variability using process design data and batch homogeneity studies; and develop an appropriate sampling plan for PPQ

o  Stage 3, Continued Process Verification: develop a control plan as part of a risk management strategy; collect and analyze product and process data; and ensure your process is in (statistical) control and capable.

Views: 11

Comment

You need to be a member of Online Safety Community to add comments!

Join Online Safety Community

Take our poll!

Take our poll!

Latest Activity

Soujanya Naganuri posted a status
"5 years’ practical experience in design & development of service management solutions at TekSlate.com https://goo.gl/FNhVHm"
1 hour ago
John Robinson posted a blog post

Safety Management and OSHA Compliance

Why is Occupational Safety and Health Administration (OSHA) compliance necessary? For a simple reason: OSHA compliance is the surest legal way of ensuring safety at the workplace. Safety management and OSHA compliance go hand in hand and are deeply connected to and intertwined with each other. Safety management is at the core of OSHA and is the very…See More
2 hours ago
Adam Fleaming posted a blog post

How current regulations effect product development strategies

The life sciences market in Japan, consisting of pharmaceuticals, medical devices, biologics and combination products, is huge by the standards of the markets in the neighborhood, such as China, Malaysia, Singapore and Australia. It compares with those of Europe and North America. The main reasons attributed for this are the high spending power of the population, high number and density of the population, the aging population and the huge spending on the healthcare sector on R and D and…See More
2 hours ago
kate smith posted a blog post

Collaboration is important for getting things done, if handled properly

Collaboration is an essential part of our lives and careers. It is a great means to getting things done when it is not possible for us to carry out all our work ourselves. What did you do when you built your house? Did you carry out all the work related to construction, such as painting, plumbing or electrification yourself? Didn’t…See More
23 hours ago

Forum

SQL Server Windows Management Instrumentation Tasks

Hello,SSIS includes two special tasks that enable you to query system information and monitor system events: the WMI Data Reader Task and the WMI Event Watcher Task. These tasks are especially useful…Continue

Tags: Task, WMI, Server, SQL

Started by Madison Quinn Jun 20.

difference between NEBOSH and IOSH

NEBOSH “National Examination Board in Occupational Health and Safety”IOSH “Institution…Continue

Tags: kerala, IGC, NEBOSH

Started by mani May 31.

What's your favorite motivational/safety quote? 98 Replies

Favorite Motivational Quote: If you want something, you'll find a way - If not, you'll find an excuse.Favorite Safety Quote: Don't learn safety by accident!Continue

Started by Michelle Sears. Last reply by David R Snell Apr 26.

Feedback on a injury prevention product we're building.

Hi everyone!For full transparency ill tell you a little about myself and what I hope to accomplish. My name is Zuber and I'm an engineering student who founded a startup helping to build wearable…Continue

Tags: product, prevention, injury, back, safety

Started by Zuber Ahmed Apr 24.

Best overall personal safety book? 1 Reply

What do you think is  the best all-in-one book out there for optimizing personal safety and the safety of one's family?  Right now I have …Continue

Started by David R Snell. Last reply by David R Snell Apr 21.

Badge

Loading…

© 2017   Created by Safety Community.   Powered by

Badges  |  Report an Issue  |  Terms of Service