Online Safety Community

Safe and effective as a non PMA-subjected legally marketed device

A medical device has to mandatorily make a submission for premarket approval (PMA) to the FDA to demonstrate that the device to be marketed is substantially equivalent or at least as safe and effective as a non PMA-subjected legally marketed device. This submission is called 510 (K).

A medical device company has to submit a product for PMA when it manufactures or makes changes and modifications that could substantially affect safety and effectiveness requirements under 21 CFR 807 and design control requirements under the Quality System (QS) regulation. FDA provides guidance on how to meet the QS regulation requirements, under which all Class II and III devices and certain Class I devices have to be designed in conformance to 21 CFR 820.30 Design Controls.

510k-300x168https://compliance4all14.files.wordpress.com/2018/04/510k-300x168.jpg?w=150 150w" sizes="(max-width: 300px) 100vw, 300px" />

Step-by-step process for designing a bullet proof 510 (K)

Medical device companies which submit their premarket notification to the FDA for approval signal their intent to market their device. This submission has to be done at least 90 days before they register the product. Some logical and commonsensical steps have to be followed in designing a bullet proof 510 (K), meaning that the PMA is strong and not capable of being rejected by the FDA. Medical device manufacturers can follow these structured steps for designing a bullet proof 510 (K):

  1. Ensure, using the FDA classification database, that the product to be submitted for PMA is a medical device. This database is quite exhaustive, and has clear definitions and descriptions of the criteria that medical products have to meet if they have to be considered as medical devices
  2. In order to create a bullet proof 510 (K); the company has to also search and identify if similar products have already been approved by the FDA or others have filed for PMA for such a product with the FDA
  3. The medical device company has to next get a grasp of the guidances and standards that apply to the product that they are submitting for 510 (K). The FDA’s Product Classification Code is a good guide for this
  4. Get down to doing the submission work and send the completed 510 (K) form to the FDA
  5. Wait for the 90-day period that the FDA will take to review each submission
  6. Once the device has been cleared for submission by the FDA; the company has to start the registration process by paying the requisite fees after getting the unique 510 (K) number
  7. Appointing a US Agent, if the medical device manufacturer is from a country other than the US, is another important step for bullet proof 510 (K). The US agent takes care of the administrative work with the FDA.

Views: 5

Comment

You need to be a member of Online Safety Community to add comments!

Join Online Safety Community

Take our poll!

Take our poll!

Latest Activity

Mark Nilson posted events
2 hours ago
Training Doyens posted an event
Thumbnail

HR Practices in Terminating Employees at 26468 E Walker Dr, Aurora, Colorado 80016

June 12, 2018 from 1pm to 2pm
OVERVIEWEmployers must terminate employees from time to time in order to run their businesses effectively.In today’s litigious world, terminating employees is an emotional and legal minefield for managers and supervisors.Even subtle differences in preparing for and conducting terminations can impact greatly the level of legal risk, and whether an employer faces a claim that may cost six figures (or more) in potential liabilities and litigation costs.This webinar will give you knowledge on basic…See More
3 hours ago
Mark Nilson posted events
Friday
Training Doyens posted events
Friday

Forum

Python Condition Objects Tutorial in 2018 1 Reply

If you have knowledge of other programming languages, then you would know the importance of conditional statements. Conditional statements are required for taking decisions. Whenever we operate the…Continue

Tags: course, certification, training, languages, programming

Started by Elena Lauren. Last reply by Jim Chesters on Tuesday.

Power BI Visualization Types

Visualizations in Power BI displays the visual insights from a data. In power bi service a visual can be pinned from reports to create dashboards. Visuals are used in reports.List of visualizations…Continue

Tags: COURSE, TRAINING, BI, POWER

Started by Azharuddin May 15.

Automation Anywhere. How do I pick a value from dropdown 1 Reply

Automation Anywhere. How do I pick a value from dropdown. I tried 'set text' from a copied variable. Its very slow, and also doesnt…Continue

Tags: anywhere, automation

Started by emmablisa. Last reply by venkatesh Mar 29.

Agile overcome common software security challenges

Paradoxically, security is a negative goal. To secure something, you must understand how insecure it is. Start by trying to break it or by figuring out how other people might break it. The same is…Continue

Tags: agile, scrum, security

Started by nicolewells Mar 23.

Badge

Loading…

© 2018   Created by Safety Community.   Powered by

Badges  |  Report an Issue  |  Terms of Service