Online Safety Community

I received this email today and thought I would pass it on.

 

Please find listed below an opportunity for a HS&E summer internship 2011 with Rolls-Royce NA Crosspointe Prince George, Virginia, at the new aerospace manufacturing site.
Preference will be given to HS&E students who are looking to focus on HS&E as a career option vs. an engineering career. Candidates should be rising college Junior or Senior. This internship will be mentored by a Rolls-Royce Certified Industrial Hygienist and Certified Safety Professional.  This opportunity will help the candidate to develop skills to prepare for a career in an HS&E position immediately following his or her graduation. This position is to be filled within the next few weeks with the most qualified candidate. So please forward immediately to anyone you may think would be interested.  See attached file for additional job duties.
 
Please contact with any questions
 
Tom Rother, CIH, CSP
HS&E Engineer
Rolls-Royce NA - Crosspointe, Virgina
8800 Wells Station Road
Prince George, Va. 23875
(804) 518-7006 (Work)
(804) 638-7086 (Cell)
Tom.Rother@Rolls-Royce.com
 

========================================================================

 

The Health, Safety & Environmental (HS&E) Intern will work directly with the Rolls-Royce NA Crosspointe HS&E Engineer with projects and programs that directly relate to the student's career path. This employee will be supporting the Rolls-Royce Crosspointe site, located in Prince George, Virginia with HS&E functions at a new aerospace manufacturing site.


This internship will be mentored by a Rolls-Royce Certified Industrial Hygienist and Certified Safety Professional.  This opportunity will help to develop skills to prepare for a career in an HS&E position immediately following his or her graduation.


Major Responsibilities Include: 

  • Conduct monthly HS&E inspections, prepare reports and track abatement of all observations. 
  • Review and revise HS&E site work instructions. 
  • Facilitate and/or conduct Risk Assessments for equipment and processes. 
  • Conduct training on local HS&E Work Instructions. 
  • Develop and document specific Lockout/Tagout procedures for equipment.
  • Assist the HS&E Engineer with required environmental reporting.
  • Review the waste minimization program and introduce new ideas for improvements. 
  • Conduct ergonomic assessments and recommend improvements.  

Views: 139

Reply to This

Replies to This Discussion

Pam,

You should post this on IUPs Safety Sciences job board. Job Opportunities

You're right, I should.  So how have you been?

oh, that's you!!  Didn't make the connection with the name change haha.  I'm pretty good.  Back in PA looking for work.  How are you?   And how's NOVA treating ya?

Brian,

Yeah, I got married. 

 

If you have any interest in system safety (very integrated, proactive, risk-based, systems approach to keeping people safe - from the procurement of a product or design of a process throughout use to disposal) and wouldn't mind moving to the NoVA area, there are a number of jobs here.  Search http://www.indeed.com for "system safety".  Look for companies like SAIC, L-3, URS, Kratos, CACI, etc.

RSS

Take our poll!

Take our poll!

Latest Activity

Chris Trottier posted a blog post

Injury Free? Safety is not just a number

Safety is a goal. Safety is a mentality. Safety is effort.  Safety is a work in progress.  Safety is something every company should treasure. A quick look around and you’ll see professionals, organizations, schools and businesses touting their unwavering dedication to safety. But what does that mean?  Some will point to their low incident…See More
13 hours ago
Adam Fleaming posted a blog post

What are the Steps involved to Create a Bullet Proof 510(K)

A medical device has to mandatorily make a submission for premarket approval (PMA) to the FDA to demonstrate that the device to be marketed is substantially equivalent or at least as safe and effective as a non PMA-subjected legally marketed device. This submission is called 510 (K).A medical device company has to submit a product for PMA when it manufactures or makes changes and modifications that could substantially affect safety and effectiveness requirements under 21 CFR 807 and design…See More
16 hours ago
Roger Steven posted a blog post

The field of Health Informatics

The field of Health InformaticsHealth Informatics is catching up as a field of health and Information Technology. At its barest, it can be understood as being the area that concerns the use of IT in health. However, Health Informatics goes beyond being just this. It consists of the entire IT ecosystem in the healthcare industry, which means that individual healthcare units use IT via a connected…See More
Monday
Compliance Global Inc posted an event
Thumbnail

Prepare Your Company to Meet the Final FSMA Subpart G Rule Requirements for the Receiver Liability for Supplier Preventive Controls - By Compliance Global Inc at Online Training

June 21, 2016 from 1pm to 2:30pm
Overview:The new supply-chain-applied control requirements mean that food and food ingredient buyers must develop a cGMP training system to collect appropriate supplier qualification and certification records as part of their approval of suppliers’ system.Generally, this data repository should be used to risk-rank suppliers for several reasons. First high risk suppliers (those with inadequate preventive systems) should be educated and motivated to improve their own preventive controls. Second,…See More
Monday

Forum

SafetyCommunity members on Twitter 34 Replies

I am seeing more and more health and safety professionals on Twitter sharing information, articles and links about workplace safety. In fact, you can now follow Ansell (creator of this fine social…Continue

Tags: Facebook, Ansell, Twitter

Started by Lara Kretler. Last reply by Chris John May 18.

What's your favorite motivational/safety quote? 89 Replies

Favorite Motivational Quote: If you want something, you'll find a way - If not, you'll find an excuse.Favorite Safety Quote: Don't learn safety by accident!Continue

Started by Michelle Sears. Last reply by Chris John May 18.

Which Osha Training for hse european personnel 1 Reply

Hello everybody,I am new on this site so I create a new discussion to better understand your suggestions.I am italian and in the last 5 years I worked on the Hse field in different european…Continue

Started by Francesco Siracusa. Last reply by Francesco Siracusa Mar 4.

FORKLIFT TRAINING CLASSES 20 Replies

Any ideas on how to make Forklift Training Classes more interesting and fun?

Started by Marcia Whatley. Last reply by Mike Pattenson Feb 13.

Technical Support and Help 9 Replies

Questions and answers to all technical support questions dealing with the community.

Tags: help

Started by Safety Community. Last reply by Zelna Aug 14, 2015.

Badge

Loading…

© 2016   Created by Safety Community.   Powered by

Badges  |  Report an Issue  |  Terms of Service