Online Safety Community

Alternatives to AQL sampling plans do exist

Alternatives to AQL sampling plans do exist, but companies need to be aware of them and explore them. Acceptance Quality Limit, or AQL, is applied as a benchmark in most manufacturing organizations to inspect the quality of products they purchase. It is only when the product meets AQL that the receipt is acknowledged and the payment made.

So, what is AQL?

What is AQL? In simple terms, AQL, which expands to Acceptance Quality Limit, is what may be termed as the least or the worst or lowest level of tolerable process means that can be accepted for the quality of product. It is the ratio or percentage level below which quality cannot be lowered to be termed acceptable.

Acceptance Quality Level is accepted as a standard business practice by most medical device companies. Attribute sampling based on ANSI/ASQ Z1.4 and Zero Acceptance Number Sampling Plans by Nicholas L. Squeglia continue to be the most common applications used by companies.

Considering a viable alternative to AQL sampling plans

Although popular, these common methods are not always the best approaches. This is not to belittle the effectiveness of this method, but to just point out that these are in themselves insufficient. Medical devices need to be aware of a variety of methods and when and how to use them.

Establishing “processes needed to demonstrate [product] conformity” is a requirement from ISO 9001 and ISO 13485. Similarly, the FDA's GMP (21CFR820) requires that “sampling methods are adequate for their use”. Further, an FDA guideline states that “A manufacturer shall be prepared to demonstrate the statistical rationale for any sampling plan used”.

However, an AQL sampling plan does not provide what is needed to meet either of those requirements. Using only Attribute sampling based on ANSI/ASQ Z1.4 and Squeglia’s Zero Acceptance Number Sampling Plans, it is not possible to actually “demonstrate” that an AQL sampling plan ensures product quality.

This is where “Confidence/reliability” calculations come in as alternatives to AQL sampling plans. They are a better way to assess the quality of purchased parts. It is easy to make such calculations using tables and/or an electronic spreadsheet. It is also easy to use confidence/reliability calculations to provide evidence of product quality. The statistical rationale for such calculations is easy to explain and demonstrate, which is why these calculations constitute strong and reliable alternatives to AQL sampling plans.

A learning session on the alternatives to AQL sampling plans

These alternatives to AQL sampling plans will be the core of a learning session that Compliance4All, a leading provider of professional trainings for all the areas of regulatory compliance, will be organizing. John N. Zorich, a senior consultant for the medical device manufacturing industry, will be the Speaker at this webinar, to enroll for which, all that is needed is to visit http://www.compliance4all.com/control/w_product/~product_id=501099L...

A complete heads-up on the alternatives to AQL sampling plans

At this webinar on the alternatives to AQL sampling plans, the speaker will explain the pros and cons of ANSI Z1.4, and Squeglia's C=0 in detail. He will highlight the weaknesses of such plans vis-à-vis meeting regulatory requirements. John will offer real-world examples of how using such sampling plans leads to production of non-conforming product to fortify the learning on the alternatives to AQL sampling plans.

He will also examine ISO and FDA regulations and guidelines regarding the use of statistics, especially in regards to Sampling Plans. As part of alternatives to AQL sampling plans, John will explain the advantages of “confidence/reliability” calculations are explained. Such calculations are demonstrated for Attribute data (pass/fail, yes/no data) as well as for variables data (i.e., measurements). If variables data is “Normally distributed”, the calculations are extremely simple. The webinar explains how to handle “non-Normal” data, and provides the methods, formulas, and tools to handle such situations.

The webinar on alternatives to AQL sampling plans ends with a discussion of how one OEM manufacturer has implemented “confidence/reliability” calculations instead of AQL sampling plans for all of its clients. The speaker will offer suggestions for how to use “confidence/reliability” QC specifications instead of “AQL” QC specifications. The use of “reliability plotting” for assessing product reliability during R&D is also discussed.

The speaker will talk on the following topics during this session:

·                    AQL and LQL sampling plans

·                    OC Curves

·                    AOQL

·                    ANSI Z1.4

·                    Squeglia's C=0

·                    Confidence/Reliability calculations for

o                 Attribute data

o                 Normally-distributed variables data

o                 Non-Normal data

·                    Transformations to Normality

·                    K-tables

·                    Normal Probability Plot

·                    Reliability Plotting

Views: 37

Comment

You need to be a member of Online Safety Community to add comments!

Join Online Safety Community

Take our poll!

Take our poll!

Latest Activity

Silvia Watson posted a blog post

How Can Crossfit Training Keep You Healthy and Fit?

CrossFit is the best way to keep your body active, your mind intrigued and your system alive. This is a high-intensity workout routine that involves strength building, muscle building and weight training activities along with intense aerobic workouts. People who indulge in CrossFitting at least once in a week are faster, nimbler and retain top shape throughout the workout time span.…See More
4 hours ago
John Robinson posted a blog post

Regulations in the US and EU Dealing with Combination Products

Registering and maintaining combination products in the US and the EU is a bit tricky, because these are disparate markets that are governed by different sets of regulations which are independent of each other. So, any business that wants to market combination products into the US or the EU must be completely aware of the nature and meaning of all the regulations. Such businesses…See More
Friday
Adam Fleaming posted blog posts
Friday
Alex posted a blog post

3 essential electrical safety tips for new students

Living away from home for the first time is an exciting, invigorating, and pretty daunting experience. While your first days at uni will be the time of your life, living away from your parents also comes with a new set of challenges.Aside from cooking and cleaning, one thing we take for granted is our parents’ knowledge of how to keep us safe. Electrical safety, in particular, is something not many first-time students know a lot about, but electrical accidents are…See More
Friday

Forum

Occupational Health and Safety 5 Replies

Health and safety are important aspects of an organisation’s smooth and effective functioning.  Did you know that workplace health & safety injuries cost Australian businesses over $60 billion…Continue

Tags: Safety, and, Health, Occupational

Started by WHS Solutions. Last reply by Tara safe on Thursday.

QlikView for its Safety Strategic Business Intelligence Solution Worldwide

QlikTech (NASDAQ:QLIK), a leading…Continue

Tags: Qlikview, safety

Started by nicolewells on Wednesday.

What's your favorite motivational/safety quote? 102 Replies

Favorite Motivational Quote: If you want something, you'll find a way - If not, you'll find an excuse.Favorite Safety Quote: Don't learn safety by accident!Continue

Started by Michelle Sears. Last reply by David Collins on Tuesday.

Business Intelligence with Big Data happens at Unipê

the college center of João Pessoa will preserve the 1st assembly at big records, geared toward professionals inside the regions of administration, economics, public control and facts technologies.…Continue

Tags: qliksensetraining, qliksenseonline, qliksense

Started by Soujanya Naganuri Nov 1.

Road Safety Solutions 13 Replies

The Road Safety Signs ,Barriers,Humps,Hazard Markers and Visual Warnings are some of the important marks to be observed. Signs such as "keep left",stop, "give way" should not be casually treated.…Continue

Tags: safety, gear, wear, Equipment, &

Started by Enna Henry. Last reply by Barry Oct 26.

Badge

Loading…

© 2017   Created by Safety Community.   Powered by

Badges  |  Report an Issue  |  Terms of Service