Online Safety Community

An integrated approach is needed for Complaints Handling, Adverse Event Reporting, and Recalls

Adverse Event Reporting, and Recalls4

The fact that medical device manufacturers work and operate in various regulatory systems whose requirements are different and not always consistent with each other is recognized and empathized by the new ISO version, the ISO 13485:2016. Because of the divergence in the requirements of each regulatory system; manufacturers are required to identify their roles, as well as the regulatory requirements for that role, and then incorporate them into their Quality Management System.

When it comes to post-market device issues; the various jurisdictions, however, deal with these in different ways. Three interlocking, interrelated processes need to go into the QMS:

  • Complaint management
  • Adverse event reporting
  • Recalls

Supporting QMS processes such as corrective action and design changes also need to complement these three processes. Over and above the QMS processes come the regulatory requirements, which usually involve areas such as recordkeeping and reporting.

A complete learning on how to implement an integrated QMS

Adverse Event Reporting, and Recalls3

A highly educative and valuable learning session on these primary and secondary QMS processes and the way they need to be understood and implemented vis-à-vis the US, EU, and Canadian regulations is being organized by GlobalCompliancePanel, a leading provider of professional trainings for all the areas of reg...

The Director of this two-day seminar is Dan O’Leary, who is President of Ombu Enterprises, LLC, a company offering training and execution in Operational Excellence, which focuses on analytic skills and a systems approach to operations management. Dan brings more than 30 years’ experience in quality, operations, and program management in regulated industries including aviation, defense, medical devices, and clinical labs.

To understand the way in which to implement an integrated QMS in which the various aspects of complaints, adverse reporting and recalls are built; please register for this seminar by visiting An integrated approach is needed for Complaints Handling, Adverse E... This seminar has been pre-approved by RAPS as eligible for up to 12 credits towards a participant’s RAC recertification upon full completion.

Alignment with the FDA’s QMS is a major point

Complaints, Adverse Event Reporting, and Recalls - An Integrated Approach

One of the highlights of the final version of the ISO 13485:2016 standard, which has now become available, is the extent of its alignment with the FDA’s Quality Management System (QMS) requirement. Although the degree of alignment set out in 2016 version of 13485 is significantly higher than that of the previous version of 2003; there still do exist a few points at which it deviates from the FDA’s QMS. Companies that are required to comply with this standard have to keep this in mind.

Now that the ISO 13485:2016, the Medical Device Single Audit Program (MDSAP), and the new EU Medical Device Regulation have been introduced; companies need to update their QMS and integrate all of the elements if their implementation has to be effective and compliant. At this two-day session, Dan will provide the tools that the participants will need for this.

_MG_1317

The agenda of this learning session will be the following:

  • The Regulatory Structure
  • FDA QSR
  • ISO 13485:2016 and regional variants
  • ISO 14971:2007 and regional variants
  • Implementing MDSAP
  • The EU Medical Device Regulation
  • Servicing
  • Identification of problems
  • Servicing data analysis
  • Input to the complaint process
  • Complaints

Identifying complaints

  • Evaluating complaints
  • Investigating complaints
  • Complaint data analysis
  • Input to the corrective action process
  • Input to the risk management process
  • Corrective Action
  • Developing the process
  • Analyzing product and process information
  • Determining subsequent actions
  • Input to the design process
  • Input to the risk management process
  • Design and Design Changes
  • Determining the need for a design change
  • Documenting design changes
  • Design change verification and validation
  • Input to the risk management process
  • Input to the pre-market submission process
  • Risk Management
  • ISO 14971:2007 and regional variants
  • Incorporating post-market information
  • Updating Pre-market Submissions
  • US – The 510(k) guidance
  • EU – Technical files and design dossiers
  • Canada – License changes
  • Adverse Event Reporting
  • US – MDR
  • EU – Vigilance Reports
  • Canada – Mandatory Problem Reporting
  • Recalls
  • US – Corrections and Removals
  • EU – Field Safety Corrective Actions
  • Canada – Recall.

Views: 6

Comment

You need to be a member of Online Safety Community to add comments!

Join Online Safety Community

Take our poll!

Take our poll!

Latest Activity

Rachel Min posted a blog post
Friday
Profile IconJeff Pacheco, KATE KWAME, Rob Minjock and 2 more joined Online Safety Community
Friday
John Robinson posted a blog post

Learn any professional courses for $10 only

Want to enhance your regulatory compliance career by learning a new course? All that it costs is $10. Yes, GlobalCompliancePanel, a provider of professional trainings, is offering hundreds of high value regulatory compliance courses for a mere $10 each.…See More
Friday
Adam Fleaming posted a blog post

The GDPR differs Significantly from EC Data Protection Directive 95/ 46

The General Data Protection Regulation (GDPR), which has been codified as Regulation (EU) 2016/679, is a very powerful law regarding the protection of data of the half billion people who live in the European Union (EU). Having come into effect as a result of the European Commission having adapted the proposal for its creation on January 25, 2012; it will replace Directive…See More
Wednesday

Forum

Safety - A Prerequisite 11 Replies

Whether working at home or outside, to observe safety should be our pre-requisite. The employer before anything must be sure of the safety of its employees especially the ones working in mines or any…Continue

Tags: products, safety

Started by Enna Henry. Last reply by Tara safe on Wednesday.

Lean Six Sigma Black Belt Training in New York City

Welcome to MSys Training! We thank you for visiting MSys LSSBB training page. Attend our 4 days Lean Six Sigma Black Belt (LSSBB) training program with 100% pass rate, high quality course material,…Continue

Tags: sigma, six

Started by rodriguezcecelia Aug 11.

ITIL Certification Training - MSysTraining

The ITIL® Foundation is an entry level qualification in Information Technology industry. It gives participants information about the key elements, terminologies and concepts used in the ITIL Service…Continue

Tags: itil

Started by rodriguezcecelia Aug 8.

Snowflake and Star Schema in Qlikview

In big name schema all of the facts are stored in one important table and the usage of number one key and overseas key courting different measurement tables are related with the fact desk.SNOWFLAKE…Continue

Tags: processing, transactional, qlikview

Started by Soujanya Naganuri Jul 25.

What is Class Structure in Pega?

Class contains the rule by way of which objects behave. outline rules such as houses, sports, flows, html paperwork, etc. to be had to different subordinate classes. lessons are organized into a…Continue

Started by Soujanya Naganuri Jul 17.

Badge

Loading…

© 2017   Created by Safety Community.   Powered by

Badges  |  Report an Issue  |  Terms of Service