Online Safety Community

Product Reliability is among the most important attributes for a product, no matter what kind of product one is considering. Product Reliability can be defined as the likeliness or probability of the product performing its stated purpose, in the light of the conditions under which it is going to be put, for a defined period of time.

The parameters used for quantification of Product Reliability are:

o  MTBF or Mean Time Between Failures for products that can be repaired and used, and

o  MTTF or (Mean Time To Failure) for products that cannot be repaired.

If these are the parameters used for quantifying Product Reliability, how does one predict it? Quality professionals use a relatable analogy to explain how to assure measurability of Product Reliability. This is known as the bathtub curve analogy, where the start or early life of the product is placed at the start of the bathtub. As the product starts getting used, it moves on to the phase of its useful life, from where it moves on to its wear out time.

The time taken for each of these processes is the indication of Product Reliability. Product reliability using the bathtub curve analogy suggests that at the beginning of the product lifecycle, the probability of failure rate is relatively less. As the product progresses on to its next phases, the probability of failure rate increases. This is the root of the understanding of predicting Product Reliability. Mathematical formulae are used to describe these.

How does on get Product Reliability right?

The ways of choosing the right reliability parameters for failure rates of respective products and estimating their lifecycle in the light of failure rates will be the topic of a webinar that is being organized by Compliance4All, a leading provider of professional trainings for all the areas of regulatory compliance.

At this webinar, Steven Wachs, Principal Statistician at Integral Concepts, Inc. where he assists manufacturers in the application of statistical methods to reduce variation and improve quality and productivity, will be the speaker. To benefit from the experience Steven brings into Quality, please register for this webinar by logging on to http://www.compliance4all.com/control/w_product/~product_id=501164?...

A description of the various approaches to Product Reliability

Steven will offer and explain several approaches that can be used to verify whether reliability targets or specifications have been achieved at the desired level of confidence. In particular, he will describe the approaches using time-to-failure data to estimate reliability metrics.

Also taken up at this session, which will be of immense use to anyone with a vested interest in product quality and reliability, such as Product Engineers, Reliability Engineers, Design Engineers, Quality Engineers, Quality Assurance Managers, Project/Program Managers, and Manufacturing Personnel are demonstration tests, where minimum reliability may be demonstrated with zero or few failures.

A description of the methods that increase the risk of failures

Steven will discuss the kind of methods, which when used, increase the risks of field failures due either to inadequate designs or misconstruction of product use conditions that need to be managed. He will also offer the options for verifying and demonstrating that customer reliability requirements have been achieved.

Steven will cover the following areas at this webinar:

o  Overview of Reliability

o  Reliability Metrics and Specifications

o  Estimating Reliability with Time-to-Failure Data

o  Confidence Intervals and Bounds

o  Demonstrating Reliability with zero or few failures

o  Tradeoffs between Testing Time and Sample Size

o  Impact of Assumptions on Test Plans

o  Improving Demonstration Test Power

http://ftp.automationdirect.com/pub/Product%20Reliability%20and%20M...

Views: 32

Comment

You need to be a member of Online Safety Community to add comments!

Join Online Safety Community

Take our poll!

Take our poll!

Latest Activity

Rachel Min posted a blog post
Friday
Profile IconJeff Pacheco, KATE KWAME, Rob Minjock and 2 more joined Online Safety Community
Friday
John Robinson posted a blog post

Learn any professional courses for $10 only

Want to enhance your regulatory compliance career by learning a new course? All that it costs is $10. Yes, GlobalCompliancePanel, a provider of professional trainings, is offering hundreds of high value regulatory compliance courses for a mere $10 each.…See More
Friday
Adam Fleaming posted a blog post

The GDPR differs Significantly from EC Data Protection Directive 95/ 46

The General Data Protection Regulation (GDPR), which has been codified as Regulation (EU) 2016/679, is a very powerful law regarding the protection of data of the half billion people who live in the European Union (EU). Having come into effect as a result of the European Commission having adapted the proposal for its creation on January 25, 2012; it will replace Directive…See More
Wednesday

Forum

Safety - A Prerequisite 11 Replies

Whether working at home or outside, to observe safety should be our pre-requisite. The employer before anything must be sure of the safety of its employees especially the ones working in mines or any…Continue

Tags: products, safety

Started by Enna Henry. Last reply by Tara safe on Wednesday.

Lean Six Sigma Black Belt Training in New York City

Welcome to MSys Training! We thank you for visiting MSys LSSBB training page. Attend our 4 days Lean Six Sigma Black Belt (LSSBB) training program with 100% pass rate, high quality course material,…Continue

Tags: sigma, six

Started by rodriguezcecelia Aug 11.

ITIL Certification Training - MSysTraining

The ITIL® Foundation is an entry level qualification in Information Technology industry. It gives participants information about the key elements, terminologies and concepts used in the ITIL Service…Continue

Tags: itil

Started by rodriguezcecelia Aug 8.

Snowflake and Star Schema in Qlikview

In big name schema all of the facts are stored in one important table and the usage of number one key and overseas key courting different measurement tables are related with the fact desk.SNOWFLAKE…Continue

Tags: processing, transactional, qlikview

Started by Soujanya Naganuri Jul 25.

What is Class Structure in Pega?

Class contains the rule by way of which objects behave. outline rules such as houses, sports, flows, html paperwork, etc. to be had to different subordinate classes. lessons are organized into a…Continue

Started by Soujanya Naganuri Jul 17.

Badge

Loading…

© 2017   Created by Safety Community.   Powered by

Badges  |  Report an Issue  |  Terms of Service